|
Home Improvement Articles |
The rise and drop in temperatures in the coming
years, place intense pressures on consumers around the world as this
means only one thing, more energy and fuel are needed to control the
environment and make homes more comfortable.
Over the years, new technology has been invented to improve the manner
of living - energy saving devices are not excluded. However new
technology, as always, is a bit expensive at first. And the prices will
go down after some time. But instead of waiting for a more affordable
energy saving devices, let us apply our common sense today and do some
effort in saving energy.
•Avoid "phantom" energy users.
Electrical appliances that are plugged in to sockets even when not in
use consume energy. It is like a turning on the engine of your car and
idling for a very long time. A single appliance that remains plugged in
may not give a significant increase in your electric bill but letting
every appliance on "standby" can be a real money spender. Make sure to
pull the plugs of every appliance from their sockets whenever you don't
use them.
•Turn down temperature of water heaters.
Water heaters hold about 40 gallons of water and maintain it at a
constant temperature. Forty gallons of water that is sitting in your
tank for a very long time consumes a lot of energy. If the water heater
is not expected to be used for a while, it is advisable to maintain it
at a lower temperature.
•The openings and leaks in doors and windows create drafts.
The stronger the draft is, the longer it will take for homes to be
heated or cooled - in addition to the extra work that a heater or an
air-conditioning system is doing to regulate the right temperature of
the house. In newer homes, the problems may be few as today's' builders
take more attention to sealing drafts potential areas and slots. Older
homes may not be as well sealed. Even if the outer walls are insulated,
air leaks often occur around wall outlets, switches and vents that could
result in water condensation around these areas. A good foam patch could
fix the problem.
•If there is really nothing to prepare much cooking for, let the stove
and oven rest.
Instead, use the microwave. When cooking in stoves though, the closer
the bottom of the pan used for cooking matches the hob ring of the
stove, the more energy is saved. Too much flame for the pan and you are
paying for heating the air around it.
•CFL lights are energy savers.
Using CFL bulbs will save you more than sixty percent of the cost of
lighting compared with using incandescent light bulbs. Sure CFL lamps
are a little more expensive but these are recovered easily because of
its longer life and the energy saving feature it has.
•Clean appliances regularly.
Dirt and dust interferes with the efficiency of appliances. Likewise,
place a good distance; allow about four inches of distance between the
wall and appliances that generate heat for your walls not to retain the
heat.
•When in the market always look for the energy coefficient and the
energy saving features of the appliance you are buying.
![]()
About the Author: D. Benjamin is the owner of
iapsales.com LLC - a family business specializing in HVAC products. We
are distributors of
Qmark Heaters,
electric tankless water heaters,
bathroom heaters,
patio heaters, electric heaters, portable air
conditioners & electric towel warmers. Shop online at
www.heateroutlet.com for these great home improvement products.
Iapsales.com LLC was established in 2003 and is the sister company to
Innovative Air Products located in historical Exeter, NH. We are a 2nd
generation manufacturers’ rep firm dedicated to providing residential &
commercial heating, ventilation and air-conditioning equipment. We offer
a great selection online at the lowest prices anywhere. We can also be
found on Facebook, Twitter and YouTube
| Blogroll | |||
|
| |||