Do It Yourself Patio
Patios enhance the beauty, comfort and value of
a home. If one would like to build a patio there are a myriad of
do-it-yourself kits available in the market. Most of them offer
popular, visually pleasing home improvement products. DIY patio
cover kits and patio room enclosure kits increase property value,
add outdoor living space, and provide homeowners with an attractive,
unique maintenance-free sanctuary from the blazing sun or pouring
rain at the same time saving them thousands of dollars from paying
the professionals to do the same job.
Equipment needed for a DIY patio project
Apart from the do-it-yourself kit which will contain all the plans
and some of the material, you will need to include in your tool kit
a circular saw, power drill, galvanized deck screws, chalk line,
tape measure, adjustable wrench, safety goggles, jigsaw,
reciprocating saw, pneumatic nail gun kit that can be rented, gloves
and mask, level, framing square, speed square, masonry drill bit,
hammer and a utility knife. Before you start to build your deck,
you'll need a temporary worktable. For that, you'll need a couple of
sawhorses, which can be built out of scrap lumber.
Selection of materials for the Patio
Make sure to draw up a set of plans before you start to help in
determining the amount of materials needed for the project. Once you
have drawn up your plans and have al the material ready you can
start on the deck. Select your lumber. Some outlets will let you
pick out the boards for a deck project, but it is always advisable
to have an understanding with the retailer that you can return any
warped or unacceptable boards or lumber that may not be used up in
the course of the project. Pick lumber that is straight with as few
imperfections as possible and have the lumber delivered close to the
job site.
Location of patio and other aesthetic factors
You must decide what you will be have on the deck, such as a hot tub
for instance, You will have to build the foundation accordingly.
Building a patio will involve a lot of carpentry and hard labor.
Though you will have all the instructions laid out for you right
from scratch it is always advisable to have the advise of an
engineer when it comes to the technicalities. When all is done,
which would mean a week or more, it will be good to stand back and
admire your work and think about the cash you have saved yourself by
doing it yourself.
About the Author: D. Benjamin is the owner of
iapsales.com LLC - a family business specializing in HVAC products. We
are distributors of
Qmark Heaters,
electric tankless water heaters,
bathroom heaters,
patio heaters, electric heaters,
portable air
conditioners & electric towel warmers. Shop on line at
www.heateroutlet.com for these great home improvement products.
Iapsales.com LLC was established in 2003 and is the sister company to
Innovative Air Products located in historical Exeter, NH. We are a 2nd
generation manufacturers’ rep firm dedicated to providing residential &
commercial heating, ventilation and air-conditioning equipment. We offer
a great selection online at the lowest prices anywhere. We can also be
found on Facebook, Twitter and YouTube