|
Home Improvement Articles |
There are many low-pressure crack injection kits
which come with simple instructions so the homeowner can repair
cracks in poured basement walls or retaining walls, gaps between
walls and the ceiling and around pipe penetrations. The homeowners
can avail of these to repair cracks with professional results at a
fraction of the cost.
Advantages of Concrete Crack Repair Kits
Modern concrete repair kits contain polyurethane foam, which fills
even a 24-inch thick wall. The application is much relatively simple
and mainly, the polyurethane foam remains flexible to allow for the
natural movement of concrete. There are crack injection kits that
seal both hairline and wide cracks, be it wet or dry ones and these
require no drilling as the injection ports are glued on, offering a
permanent solution. These come with dual cartridges and a mixing
nozzle to ensure precise mixing of the polyurethane polymers and a
permanent seal. Standing apart from this option is the surface
sealer and adhesive which is easy to peel and use: it can be peeled
off together with the injection ports in one piece and is popular
because it leaves a neat and clean concrete surface - no chiseling
or grinding needed. This requires no hand mixing so is not messy at
all.
How to Repair Concrete Cracks
Most high grade kits for concrete come equipped to deal with cracks
up to 10 feet and all that is needed is nit rile gloves, safety
glasses and a drop sheet with the skill to use a conventional
caulking gun. Patience is required to ensure that the wall surface
around the crack is clean, dust-free and dry and then gluing
injection ports on top of the crack, before covering the crack with
a layer of epoxy paste. This takes about 4-5 hours to cure and then
the injection of the polyurethane resin into the bottom injection
port can be started. When the polymer starts coming out of the
higher port, cap the port and move on to next the higher port until
the whole crack is filled. The curing will take another 3 hours and
then the injection ports can be knocked off.
![]()
About the Author: D. Benjamin is the owner of
iapsales.com LLC - a family business specializing in HVAC products. We
are distributors of
Qmark Heaters,
electric tankless water heaters,
bathroom heaters,
patio heaters, electric heaters,
portable air
conditioners & electric towel warmers. Shop on line at
www.heateroutlet.com for these great home improvement products.
Iapsales.com LLC was established in 2003 and is the sister company to
Innovative Air Products located in historical Exeter, NH. We are a 2nd
generation manufacturers’ rep firm dedicated to providing residential &
commercial heating, ventilation and air-conditioning equipment. We offer
a great selection online at the lowest prices anywhere. We can also be
found on Facebook, Twitter and YouTube
| Blogroll | |||
|
| |||