The Stelpro SK1501W ceiling heater is the perfect way to heat your bathroom. This heater comes with a free wall mounted thermostat model T410B.
  Please select "Standard T410B" in the drop down list for your free thermostat when you're ready to check out.
  If you would like a digital thermostat or timer those are available at an addition cost. 
  If you have your own controller than please select 
"No Thermostat" and we will take $ 30 off your order.

This electric ceiling heater will heat up to 150 sq. ft. room. 

- 1,500 watts (5,118 BTU's) 
- 120 volts/ 1phase 
- 60 CFM
- 14 Lbs 

Color: White 
Finish: Epoxy polyester powder coat. 
Dimensions: 
Back Box: 9 1/4"W x 14 1/4"L x 4 1/2" D 
Grille: 11 1/2"W x 16 1/2" H 

Features Aesthetic 
- Contemporary grill design with carefully rounded edges, inconspicuous (1/4" protrusion) and easy to maintain 
(no screws).

Construction 
- 20 gauge steel cabinet and 18 gauge steel grill. 
- Grill is removable without tools as there are no screws. 
- Wire mesh for added security. 
- Thermal protection with automatic reset. 
- Permanently lubricated motor.

Element: 
- Top quality nickel-chrome element for instant heat. 

 • Standard Wall Thermostat: INCLUDED                 (T410B)
Click here for more Info

 • Sensing Element: Bimetal. 
 • Set point Adjustment: Setting dial on the face of the thermostat. 
 • Temperature Range: 40° to 80°F (5° to 25°C) 
 • Differential: 3°F (2°C), nonadjustable.
•  Switching: Micro Switch Snap-acting switch. 

OTHER Thermostats & Timers   (Sold Separately)

• Digital: Wall Thermostat                                        (STE402)
Click here for more Info 
Max Load: 16.7A 
 • 2000 Watts at 120 Volts
 • 4000 Watts at 240 Volts 
 • Sensing Element: Digital
 • Set point Adjustment: Setting button on the face of the thermostat. 
 • Temperature Range: 37° to 86°F (3° to 30°C) 
 • Differential: .5°F (.5°C), nonadjustable.

               OR

Programmable: Wall Thermostat 
Click here for Factory Web Site                (TH106) 

TEMPERATURE CONTROL
• Microprocessor-optimized PIA
• Heating cycles: 15 seconds
• Accuracy: ± 0.15ºC / 0.27ºF

SWITCHING ACTION 
•  TRIAC: Silent operation

PROGRAMMING
• 7-day, 4 time periods/day, 2 temp. settings
• Pre-programmed or personalized schedule
• Early Start function
• Selectable 12- or 24-hour clock / ºC or ºF

Timer - Spring Wound - 
Intermatic Model                                 (FD60MWC)
- Single Pole Thermostat
- Click for Cut-Sheet

Installation: 
- Insulation can come in direct contact with unit, towards or away from frame. 
- The optimum mounting height for this heater is 8 feet from floor. In any case do not install closer than 6 feet from the floor, or closer than 6” to adjacent walls.

Warranty: 
- 10 years on element and 1 year on components. 
Stelpro SK1501W Fan Forced Electric ceiling heaters.