Qmark CUS94510243FF Cabinet Unit Heaters 240 Volts. 10,000 watt, 34,130 BTU electric unit heaters can be mounted horizontally or vertically.

This CUS900 Series Cabinet Unit Heater is designed with the architect, engineer, contractor and end user in mind. A multi-functional heater to satisfy a wide array of applications with style and efficiency, created by combining classic lines with greatly enhanced features.

       

Dimension:
Width: 45"
Height 26 3/8"
Depth: 9 7/8"

Model Qmark CUS94510243FF :
- 240 Volts 
- 43 Amps in 1 Phase 
- 24.1 Amps in 3 phase
- 10,000 watts (34,130 BTU's)
-   6,700 watts on Low

- 500 CFM High
- 400 CFM Low
- 160 Lbs.
- Neutral Gray enamel Finish

Features:
• Field convertible to single phase - Factory field convertible three phase to 240 volt in single phase.
• Balanced three phase operation - All three phase heaters have a balanced heating load.
• Thermostat - Built-in 24 volt thermostat and transformer supplied standard, field convertible to 24 volt wall thermostat.
• Filter - Throwaway inlet air filter supplied standard.
• Heat settings - Hi/Lo heat settings and two speed fan.
• Interchangeable intake & discharge louvers - Supplied front in-front out, intake can be changed from front to bottom and/or discharge louvers from front to top by removing only two screws.
• Universal mounting - The new CUS900 mounts with discharge air in the up flow or down flow directions, or with the heater mounted on its end panel, it delivers heat in the left or right airflow direction or it can be ceiling mounted.
• Front Cover Interlock - The heater is shut down if the front cover is opened, providing an additional safety feature for maintenance personnel.
• Connect to BAS or EMS - Terminals are provided for direct connection to Building Automation or Energy Management Systems for night or off season control. 
• Remote fan only switch - Factory supplied with integral switch for continuous fan operation and terminals available for remote switch. 
• Non Fused Disconnect- A three pole non-fused disconnect switch disconnects power to the heater. Design prevents entry into the control compartment until disconnect switch is turned to the OFF position.

• UL Listed

Optional Accessories: (Sold Separately)

Optional ADD
Reccessed  Trim Kit: Use for Wall or Ceiling Mounting.

Optional ADD
Floor / Toe Base Kit: A kick plate panel for off the floor mounting.

Qmark CUS94510243FF Cabinet Unit Heaters 240 Volts. 10,000 watt, 34,130  BTU electric unit heaters can be mounted horizontally or vertically.